Audio Technica AT-LP3XBT and AT-SP3X Package
In stock
Features
| Warranty The length of time your product is protected by warranty | Full Warranty |
|---|---|
| Brand Color | None |
Tech Specs
Audio Technica AT-SP3X Active Speakers
- Speaker Unit - 76 mm (3.0") dia. x 2
- Tweeter Unit - 27 mm (1.1") dia. x 2
- Maximum Output - 30W
- Frequency Response - 55 to 20,000 Hz
- Communication System - Compliant with Bluetooth standard Ver. 5.3
- Maximum RF Output - 10 mW EIRP
- Maximum Communication Range - Line of sight - approx. 10 m (33')
- Frequency Band - 2.4 GHz band (2.402 GHz to 2.480 GHz)
- Modulation Method - GFSK, Pi/4DQPSK, 8DPSK
- Spread Spectrum Method - FHSS
- Compatible Bluetooth Profiles - A2DP
- Support Codec - SBC
- Supported Content Protection Method - SCMS-T
- Supported Sample Rates - 44.1 kHz, 48 kHz
- Supported Bit Rates - 16 bit, 24 bit
- Transmission Band - 20 to 20,000 Hz
- Power Supply - AC100-240V / DC18V (using supplied AC adapter)
- Input Jack - Analog audio input terminals (RCA pin plug x 2)
- Speaker Cord Length - 2.0 m (6.6')
- AC Adapter Cord Length - 1.2 m (3.9')
- Dimensions - 200 mm (7.9") x 113 mm (4.9") x 145 mm (5.4") (H x W x D)
- (excluding protrusions)
- Weight - Left Side: Approx. 1.5 kg (3.3 lbs)
- Right Side: Approx. 1.6 kg (3.5 lbs)
- Operating Temperature - 5°C to 40°C (41°F to 104°F)
- Accessories Included - AC adapter, AC adapter replacement plug x 4, speaker cable (for L/R connection), rubber foot x 8
- Notes - For product improvement, the product is subject to modification without notice.
Audio Technica AT-LP3XBT Turntable
- Type: Belt-drive, fully automatic operation
- Motor: DC motor
- Drive Method: Belt drive
- Speeds: 33-1/3 RPM, 45 RPM
- Turntable Platter: Die-cast aluminium
- Wow and Flutter: < 0.2 % WRMS (33 RPM) at 3 kHz
- Signal-to-Noise Ratio: > 60 dB
- Output Level: PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec
- LINE: 252 mV nominal at 1 kHz, 5 cm/sec
- Phono Pre-Amp Gain: 36 dB nominal, RIAA equalized
- Communication System: Bluetooth version 5.2
- Frequency Band: 2.402 GHz to 2.480 GHz
- Maximum RF Output: 2.5 mW EIRP
- Maximum Communication Range: Line of sight - approx. 10 m (33')
- Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
- Compatible Bluetooth Profile: A2DP
- Support Codec: Qualcomm® aptX Adaptive audio, Qualcomm aptX
Description
The Audio Technica AT-LP3XBT and AT-SP3X Package is a Package combining the great value AT-LP3XBT turntable (with onboard phono stage) with AT-SP3X active speakers.
Audio Technica AT-SP3X Active Speakers (Pair)
Audio Technica has produced a compact yet punchy unit with the Audio Technica AT-SP3X Active Speakers. They are ideal for use with the Audio Technica range of turntables as well as computers and smartphones. They can be connected by wire or a Bluetooth connection and they feature a 3” woofer and 1.1” tweeter.
View Full Product Details Here
Audio Technica AT-LP3XBT Turntable
Audio Technica AT-LP3XBT turntable is an automatic belt-drive design which can be used wirelessly via bluetooth or via normal RCA interconnects as a wired turntable.
View Full Product Details Here
Talk to one of our hi-fi specialists
This is a highly recommended pairing, but please remember it is only an example - we can spec higher model amps or speakers to your room and requirements - please send us an e-mail or give us a call on 01212247300 to speak to one of our passionate hi-fi experts.