Hi-Fi System 28 – Icon Audio LA5 TX + MB90 MKII M + Klipsch Heritage Cornwall IV + Cables
In stock
Features
| Warranty The length of time your product is protected by warranty | Full Warranty |
|---|---|
| Brand Color | None |
Tech Specs
The speakers - Klipsch Heritage Cornwall IV Speakers (Pair)
- Sensitivity: 102dB @ 2.83V / 1m
- Power Handling: (CONT/PEAK) 100W/400W
- Maximum SPL: 119dB Continuous
- Nominal Impedance: 8 ohms Compatible
- Crossover Frequency Hf: 5000Hz
- MF: 700Hz
- High Frequency Driver:
- K-107-TI 1” (2.54cm) Titanium diaphragm
- compression driver
- Midrange: K-702 1.75” (4.45cm) Polyimide
- diaphragm compression driver
- Low Frequency Driver: K-33-E 15” (38.1cm) Fiber-composite cone
woofer
- Enclosure Material MDF: with fine veneers
- Inputs: Dual binding posts / bi-wire / bi-amp
- Height: 38” (96.52cm)
- Width: 25.3” (64.3cm)
- Depth: 15.5” (39.4cm)
- Weight: 95.76 lbs (43.43kg)
The power amplifier - Icon Audio MB90 MKII M Mono Block Valve Power Amplifier (Pair)
- Class A, all Triode front end
- Switchable Ultralinear/Triode 115/60W
- 4x KT120 matched valves (per pair)
- 2x 6SL7 2x 6SN7 driving valves (pair)
- Signal to noise level: -90db
- Freq response: 20-20k Hz (+0-0.5dB)
- THD: typically <0.1% 1khz (4/8 Ohm)
- SCR Hi-Fi Audio Capacitors
- Cable: Silver plated pure copper PTFE
- Big custom wound PSU with Choke
- Gold plated Input & speaker terminals
- Sensitivity: 450mv/ 950mv (high/low)
- Power: 230/240v, 200watts approx
- Consumption: 38/200W Standby/Max
- Dimensions (WDH): 200 x 500 x 220mm
- Weight: 21kg
The pre amplifier - Icon Audio LA5 TX Valve Pre Amplifier
- Icon Audio custom output transformers
- All hand wired point to point
- ALPs Blue motorised volume pot.
- Stepped attenuator option
- All Triode simple design
- 2x 6SN7 valves
- 274B Valve rectifier (also use GZ34/5AR4/5U4)
- Double Choke HT supply
- DC heater supply
- Signal to noise level -90db
- Freq response 20Hz-15kHz +0 -0.5db
- Freq response 13Hz-20kHz +0 -1db
- Freq response 7Hz-28kHz +0 -3db
- THD typically < 0.18% (0.5v output)
- Gain 2.3x, 7db
- Max output level 20v for 8.75v input
- Low output impedance of 250Ω
- Suitable for power amps 100mv-2v sensitivity
- HQ 2w metal film/wire-wound resistors
- Solen/SCR audio capacitors (Jensen option)
- Silver TEFLON audio cable
- Gold plated Input terminals
- Four line inputs
- Record loop
- 220/240volts 75watts
- Comprehensive manual supplied
- C E compliant
- 345W, 310D, 195H (with 274B)
- 170H with GZ34 18kg with packing
The cable - Chord Epic XL Reference Speaker Cable - 3m Pair
- Conductor: Silver plated, OFC
- Insulation: XLPE
- Configuration: Twisted pair
- Shielding: Individual +/-
- Foil: High density foil
- Coverage: 95% metal braid
- Outer Jacket: Translucent PVC
- AWG: 12, mm2: 3.31
- Diameter: 2 x 7.5mm
Description
A selected HiFi system put together by our experts here at Audio Affair that consists of the Icon Audio MB90 MKII M Mono Block Valve Power Amplifier (Pair) + Icon Audio LA5 TX Valve Pre Amplifier + JKlipsch Heritage Cornwall IV Speakers (Pair) with recommended cables
The speakers - Klipsch Heritage Cornwall IV Speakers (Pair)
Klipsch Heritage Cornwall IV Speakers are a 3-way 15 inch horn-loaded loudspeaker crafted in beautiful book-matched veneer. These speakers are a direct upgrade to the Cornwall III and feature all new K-702 midrange and Tractrix geometry. View Full Product Details Here
The power amplifier - Icon Audio MB90 MKII M Mono Block Valve Power Amplifier (Pair)
Icon Audio MB90 MKII M is a very high-performance power amplifier specifically designed to work in Triode and Ultralinear mode depending upon your preference and power needs. It can drive the very best of speakers with ease. Now featuring the Tung Sol KT120 valve crowned King of pentodes or Super KT150 valve. View Full Product Details Here
The pre amplifier - Icon Audio LA5 TX Valve Pre Amplifier
The Icon Audio LA5 TX is a transformer line pre-amplifier. Why transformer? Well made audio transformers can provide perfect coupling in a hi-fi system. Free from the “mechanical” sound of solid state and the deficiencies of output capacitors, they can make reproduction more vibrant and focussed. View Full Product Details Here
Optional Cables - Chord Epic XL Reference Speaker Cable - 3m Pair
Please note: cables pictured are NOT included but are our recommended option for this package. Please contact us to order with cables and we can do a great deal on these (View Full Product Details Here) or any other cables option.
Talk to one of our hi-fi specialists
This is a highly recommended pairing, but please remember it is only an example - we can spec higher model amps or speakers to your room and requirements - please send us an e-mail or give us a call on 01212247300 to speak to one of our passionate hi-fi experts.